F150leds logo
F150leds logo

All articles

Installing Raptor Lights or Side Vent Lighting on a 2024+ F150 with factory LED headlightsUpdated 4 months ago

A small connection modification must be made for 24+ models equipped with factory LED headlight assemblies. 

If your 2024+ F150 model truck comes factory equipped with LED headlight assemblies than your raptor grill light or side vent lighting install will requires a slight modification to the install shown in the video for halogen equipped vehicles.

The only change is simply where you connect for ground and power. Instead of connecting to a side marker light plug, you will be connecting at your headlight assemblies harness plug to the wires as indicated below.

Driver Side:
(Pin 10) Black wire with Yellow stripe = ground
(Pin 3) Grey wire with Blue stripe = power (DRL) *If truck does not have this wire then use the Brown wire with Blue stripe located in Pin 1.


Passenger Side:
(Pin 10) Black wire with violet stripe = ground
(Pin 3) Violet wire with white stripe = power (DRL) *If truck does not have this wire then use the Blue wire with a Green stripe located in Pin 1.


Was this article helpful?
Yes
No