When installing these kits on trucks that have OEM headlight housings, you will not have an individual bulb for your side marker lights. There is a single connector to your headlight assembly that we need to connect to.

For 2017-21 Super Duty Models, we recommend using PIN7 for ground and PIN6 for power.

Please use the guide below for connection.

1 - not used

2- unknown

3 - High Beams

4 - Low Beams

5 - unknown

6 - Parking lights

7 - Ground

8 - Turn signal/flashers

For 2021+ SuperDuty models, we recommend using PIN7 for ground and PIN8 for power but you can also utilize the DRL for power (PIN4).

please use the guide below for connection.

Big Shoutout & Thanks to Joe M. and Dirk K. for their help with this! They helped provide this valuable information for us.

Did this answer your question?