Skip to main content
All CollectionsProduct FAQ's & TroubleshootingHeads Up Display (HUD) Window Projection Unit
Fuel Burn Rate Calculator Settings for The Heads Up Display Unit
Fuel Burn Rate Calculator Settings for The Heads Up Display Unit

A quick explanation of how to calibrate your fuel burn rate reading for your HUD system

Support avatar
Written by Support
Updated over a week ago

Our HUD unit features a fuel burn rate readout. You can display the current burn rate or the overall average burn rate. 

You will need to calibrate it to your particular F150 however depending on both your engine type and the features of your particular F150.


​How To Calibrate

If your F150 can display current fuel burn rate in your gauge readout then set #9 to (0). You will then calibrate this readout by adjusting the number within the #2 setting.
IF Setting #9 is set to (0) then use setting #2 to calibrate.
​
If your F150 can NOT display current fuel burn rate in your gauge readout then set #9 to (1). You will then calibrate this readout by adjusting the number within the #14 setting.
IF Setting #9 is set to (1) then use setting #14 to calibrate.
​
Use setting #13 to choose between displaying the current burn rate or the average burn rate in Kilometers per hour. Setting (0) – Displays the current fuel burn rate OR setting (1) displays the average overall fuel burn rate.

Did this answer your question?